Have any question?

Services

HVAC & R

  • Review the Site location.
  • Calculation of Heating and Cooling load.
  • Designing of Air conditioning system.
  • Designing of Ventilation system for F&B’s toilets, basement and other areas.
  • Preparation of design basis report (DBR).
  • Submission of report and get clients review on the system considered and planned.
  • Considering clients view and finalizing equipment.
  • Finalization of design basis report in accordance with the discussions and suggestions.
  • Sizing & placement of equipment as per architect aspect and site need.
  • Finalizing drawings in accordance with Reflected Ceiling Plan in coordination with architect and interiors.
  • Scheduling of Equipment (Low & High Side).
  • Sizing of Other Related Items for Preparation of SOQ.
  • Preparation of Tender Drawings for Circulation to Vender.
  • Collecting Quote and Preparation of Summary for Techno-Commercial Discussion.
  • Discussion With Client After Finalizing the Techno-Commercial Comparative.
  • Finalizing Vender with Client to Start the Work.
  • Check-in All the Site Clearance Floor wise for Allotment and Assigning the Work.
  • Routine Site Visit to Check the Quality of Work and Installation Done.
  • Finishing The Site and Handing Over System for Final Operation.

PLUMBING

  • Evaluating the water requirement domestic & soft water.
  • Designing the plumbing system for building.
  • Estimating the system requirement.
  • Preparation of Design Basis Report (DBR).
  • Preparation of layout for water supply, drainage internal & external.
  • Preparation of hot water system and layout.
  • Designing layout for storm water network.
  • Designing of rainwater provision for water harvesting and usage.
  • Finalizing plumbing equipment items & fixtures.
  • Estimating The Cost of Plumbing System.
  • Submittal of The Preliminary Drawings, Estimates for approval
  • Finalizing The Detailed System and Preparation of detail and Execution Layout.
  • Submitting The Final Tender Document to the Client for further Process of Execution Activities.
  • Issuing The Tender Document to the Venders and Suppliers for Capital Equipment.
  • Negotiating The Venders for Final Work Allotment.
  • Finalizing The Contractor and Supplier.
  • Monitoring of System and Routine Check Up for Integrity and Workmanship.

ELECTRICAL

  • Understanding the site and considering power requirement.
  • Calculation of Electrical Load and preparation of Load Summary.
  • Designing of complete Electrical System including High Voltage, Medium Voltage & Low Voltage.
  • Designing of Lighting system.
  • Preparation of Design Basis Report.
  • Submission of report and get clients’ review.
  • Final considering clients view and finalizing equipment (Transformer & DG. UPS)
  • Finalization of design basis report in accordance with the discussions and suggestions.
  • Sizing & placement of equipment as per architect aspect and site need.
  • Finalizing drawings in accordance with Reflected Ceiling Plan (RCP) drawing in coordination with architect and interiors.
  • Scheduling of equipment (electrical panel, HT panel, main LT panel floor panels, distribution boards & switch boards).
  • Sizing of other related items for preparation of SOQ.
  • Preparation of tender drawings for circulation to vender.
  • Collecting quote and preparation of summary for techno commercial discussion.
  • Discussion with client after finalizing the techno commercial comparative.
  • Finalizing vender with client to start the work.
  • Check-in all the site clearance floor wise for allotment and assigning the work.
  • Routine Site visit to check the quality of work and installation done.
  • Finishing the site and handing over system for final operation.

 

FIRE FIGHTING SYSTEM

  • Understanding firefighting A man using a carbon dioxide fire extinguisher to fight a fire.
    system design is crucial for ensuring the safety and protection of a building and its occupants.
  • Identifying key safety considerations such as the type of building, its occupancy, and potential fire hazards is essential for designing an effective firefighting system.
  • Selecting the right fire suppression technology, such as water-based systems, gas-based systems, or foam-based systems, depends on the specific needs and requirements of the building.
  • Integrating firefighting systems with building design involves considering factors such as building layout, accessibility, and potential obstacles for firefighters.
  • Implementing regular maintenance and inspections of firefighting systems is necessary to ensure their proper functioning in case of a fire emergency.
  • Training personnel for effective firefighting is crucial for ensuring a quick and efficient response to a fire emergency.
  • Adhering to regulatory standards and codes, such as NFPA codes and local building codes, is essential for ensuring the compliance and effectiveness of firefighting systems.
  • Submittal of the preliminary drawings and estimates for the final approval from client.
  • Finalizing the detailed system and preparation of detail and execution layout.
  • Submitting the final tender document to the client for further process of execution activities.
  • Issuing the tender document to the venders and suppliers for capital equipment.
  • Negotiating the venders for final work allotment.
  • Finalizing the contractor and supplier.
  • Monitoring of system and routine check-up for integrity and workmanship.
  • Checking and handing over of the system for final operation.
  • Application Drawing for Fire NOC.

 

 

FIRE PROTECTION & ALARMING SYSTEM

  • Building Layout and Occupancy Classification.
  • Identify Potential Fire Hazards.
  • Determine Necessary Zones.
  • Choose Appropriate Detectors.
  • Develop Alarm Signals and Notification Methods.
  • Determine Power Supply.
  • Create an Evacuation Plan.
  • Choose a Monitoring Service.
  • Follow Code and Regulatory Requirements.
  • Preparation of Fire Alarming Layout defining different Zone. Allocating all type of detectors required as per NBC and NFPA Latest Norms.
  • Preparation of Looping Layout for Addressable and Convention Devices.
  • Submittal of the preliminary drawings and estimates for the final approval from client.
  • Finalizing the detailed system and preparation of detail and execution layout.
  • Submitting the final tender document to the client for further process of execution activities.
  • Issuing the tender document to the venders and suppliers for capital equipments.
  • Negotiating the venders for final work allotment.
  • Finalizing the contractor and supplier.
  • Monitoring of system and routine check-up for integrity and workmanship.
  • Checking and handing over of the system for final operation.

 

MEDICAL GAS PIPING SYSTEM (MGPS)

  • The design will include storage requirements, type of system proposed as system locations for the following Medical Gas Services:
    • Oxygen
    • Medical Air (MA4)
    • Surgical Air (SA7-Surgical Tool Air 7Bar)
    • Vacuum/Suction Air Nitrous Oxide (N2O)
    • Helium/Oxygen (Heliox)
    • Nitrogen (N2)
    • Carbon Dioxide (CO2)
    • Nitrous Oxide/Oxygen (Gas Mixture Entonox)
    • Gas Scavenging Systems (AGSS)
    • These design guidelines are to be used in new healthcare facilities as well as facilities that will be refurbished under the process as mentioned in Part A of these Guidelines.
    • The guidelines for pipe sizing and other associated works can be based on ISO 7396.
    • NFPA 99 guidelines should be applied for zoning, materials, hazard determination, alarms.

INTEGRATED BUILDING MANAGEMENT SYSTEM (IBMS)

  • Designing of Integrated Building Management System as per the requirement of the services to control, monitor, data analysis, Energy Efficiency Ease of Operation and maintenance and to get the collective data of overall system to understand and control the power and consumption of units and water management and efficient utilization of resources.
  • Preparation of Design Basis Report for IBMS.
  • Submittal to client for the requirement of the system to be updated.
  • Final Updation in DBR and design to cater the clients need.
  • Preparation of Drawings and Input Output IO Summary.
  • Prepare the energy management Modules Adapters Gateways.
  • Preparation of Smart Light Management Modules.
  • Preparation of Smart Water Management Modules.
  • Preparation of the list of latest sensors, devices and hardware available in the market to incorporate in the SOQ with all the technical description.
  • Preparation of Tender Documentation and submit to client and Venders.
  • Preparation of Techno-Commercial Comparison of received offers.
  • Final discussion with venders with client and finalizing Vender and allocation of work.
  • Receiving the shop drawings Schematics and related document for final approval for GAD and Goods For Construction Drawings.
  • Giving Approval for the execution.
  • Routine Monitoring of the work assigned and quality assurance.
  • Finalizing the project for operations after submitting the handover documents and producing the operation manuals for devices equipment and the software integration for the ease of use and maintenance in future.

INTERNET OF THINGS (IoT)

  • The Internet of Things IoT is now a everyday needs and connected in day-to-day activities. We provide IOT Solutions incorporating with Smart System Smart Devices and in all smart service and smart Buildings. To make system effective and efficient we do align with the best communication APIs with better communication Models Functional Blocks to establish a Functional System.
  • Smart Devices
  • IoT Applications
  • Graphical User Interface
  • Smart Security and Surveillance
  • Smart Homes
  • Smart Buildings
  • Smart Cities
  • Smart Industries
  • Smart Manufacturing
  • Smart Logistics
  • Scaled Solutions
  • Cloud Based Services
  • Designing of IOT System as per the requirement of the services to smartly cater the control, monitor, data analysis, Energy Efficiency Ease of Operation and maintenance and to get the collective data of overall system to understand and control the power and consumption of units and water management and efficient utilization of resources.
  • Preparation of Design Basis Report for IOT and Smart System Processes.
  • Submittal to client for the requirement of the system to be updated.
  • Final Updating in DBR and design to cater the clients need.
  • Preparation of Drawings and Defined the devices and Detail working Principles
  • Prepare the energy management API Modules
  • Preparation of Smart Light Management Modules
  • Preparation of Smart Water Management Modules
  • Preparation of the list of latest sensors, devices and hardware available in the market to incorporate in the SOQ with all the technical description.
  • Preparation of Tender Documentation and submit to client and Venders.
  • Preparation of Techno-Commercial Comparison of received offers

SHOP DRAWING

  • Shop drawings are detailed drawings or plans that provide specific information about how various components of a building or structure will be fabricated, installed, or assembled. These drawings serve as a crucial communication tool between design professionals, contractors, and fabricators, ensuring that construction elements are produced and installed accurately according to the design intent and project requirements. We Provide the Following Services for Shop Drawings.
  • We have years of experience in providing MEP CAD Drafting Services and also MEP CAD detailing services to the contractors, consultants, and general contractors who are working in the sector of building service and which includes Electrical, Mechanical, Fire, Public health, and Plumbing services.
  • MEP drafting services
  • We adhere to all standards and international codes with digitization.
  • We possess advanced features that are required as per our clients’ requirements.
  • We use simple mechanism processes in designing and drawings.
  • We have more than a decade-plus plus experience in delivering MEP CAD drafting services.
  • We make sure that MEP CAD drawings are at an affordable rate.
  • CAD Outsourcing is a reliable service provider that stands on the expectations of its clients.
  • We provide high-quality work and 100% customer support for MEP design and drafting services.
  • HVAC DRAWINGS
    • 1. HVAC Layout Drawing
    • (a) Equipment position, quantity and capacity
    • (b) Air Distribution Layout
    • (c) Hot / Chilled Water Piping Layout
    • (d) Control Circuit Wiring Layout
    • (e) Fire and Smoke Extraction Layouts
    • (f) Ventilation Layout for Parking and Toilets
    • (g) Thermostat Layout
  • 2. HVAC Schematic Drawing
    • (a) Ducting & Piping Schematic Drawing
    • (b) Pressurization System Schematic Drawing
    • (c) Installation Details of HVAC Equipment and System Accessories
    • (d) Single Line Diagram of HVAC System and Electrical Panels
    • (e) Smoke Exhaust System Schematic Drawing
  • 3.HVAC Section Drawing
    • (a) Duct Section Drawing
    • (b) Piping Section Drawing
    • (c) Elevation Drawing
  • 4. Foundation Detail Drawings for all Capital Equipment
  • 5. Sectional Details for Floor Level Ducting and Piping
  • 6. Chimney Exhaust Piping
  • ELECTRICAL DRAWING LIST
    • 1.Electrical Layout Drawings
    • (a) Space Planning Layout for X’mer. DG, Panels, UPS and others
    • (b) Cable Tray Layout
    • (c) Conduiting Layout
    • (d) Point Wiring Layout (Power & lighting)
    • (e) Cable Layout
    • (f) Lighting Layout (Internal & External)
    • (g) Low Voltage Layout
    • (h) Earthing Layout
  • 2. Electrical Schematic Layout
    • (a) SLD for Panels
    • (b) SLD for Cable Laying
    • (c) CCTV Schematic Layout
    • (d) Telephone Schematic Layout
    • (e) PA System Schematic Layout
    • (f) BMS Schematic Layout
  • 3. Equipment Layouts Foundation & GAD
  • 4. External Development Layout
  • 5. Earthing Pits Detailed Layout
  • 6. Earthing and Lightning Protection Layout
  • 7. Emergency Lighting Layout
  • PLUMBING LAYOUT
    • 1.Plumbing Layout Drawings
    • (a) Space Planning Layout for Underground Tank, OHWT, Sump Location WTP, STP,
    • (b) Fixture and Appliances Location Layout Drawings
    • (c) Water Supply Layout (Hot & Cold Water)
    • (d) Drainage Layout
    • (e) Toilet layout (Water Supply & Drainage)
    • (f) Drain Channel and Storm Water Network Layout
    • (g) Level Network Layout.
  • 2. Plumbing Schematic Layout.
    • (a) Hot & Cold-Water Supply Schematic Drawing
    • (b) Drainage Schematic Drawing.
    • (c) Main Network Schematic Layout (Ring man)
  • 3. Plumbing Equipment Details Foundation Layouts & GAD
  • 4. External Development Layout with invert Level
  • 5. Water Treatment Plant Sewage Treatment Plant Detailing
  • 6. Harvesting Pit Detailed Layout
  • 7. Under Ground and Overhead Tank Details
  • 8. Typical Details of all accessories mounting and Erection Arrangement Layout
  • 9. Grease Traps, Sump Details, Anti Siphonage, Catch Basin Khurra and other Layouts
  • FIRE FIGHTING SYSTEM DRAWINGS
    • 1. Dry Riser System Layout
    • 2. Fire Fighting Space Planning Layout
    • 3. Fire Sprinkler System Layout
    • 4. Fire Water Curtain System Layout
    • 5. Fire Hydrant System Layout
    • 6. Fire Extinguisher System Layout
    • 7. Fire Evacuation Layout
    • 8. Foam System and FM200, CO2 System Layout
    • 9. Schematic Drawings
      • (a) Sprinkler Riser Main Layout
      • (a) Hydrant Riser Schematic Layout
      • (a) Yard Hydrant Schematic Layout
      • (a) Fire Line Drain Schematic Layout
      • (a) Zone Control Station Valve Schematic Layout
    • 10. Fire Pump Room Layout
    • 11. Equipment Foundation Layout
    • 12. Fire Pump Electrical Connection Layout.
    • 13. Control Wiring Layout of Equipment
  • FIRE ALARMING SYSTEM DRAWINGS
    • 1. Fire Protection System Planning
    • 2. Zoning Layout
    • 3. Smoke Detection (Heat & Smoke) Layout
    • 4. Addressable and Conventional System Layout
    • 5. Field Devices System Layout
    • 6. Point-to-Point Wiring Diagrams
    • 7. Individual Device Interconnection Drawings
    • 8. Control Wiring Layout Plan
    • 9. Annunciator and Monitoring Layout
    • 10. Schematic Drawings
      • (a) Smoke & Heat Detection Schematic Layout
      • (b) Control Circuit Schematic Layout
      • (c) Fire Alarm Riser Schematic Layout
  • MEP COORDINATION DRAWINGS
    • 1. Penetration Drawing
    • 2. RCP Coordinated Service Plan Drawing
    • 3. Coordination Floor Layout Drawing
    • 4. Equipment Coordination Drawing
    • 5. Black Out and Sleeves Coordinated Drawing
    • 6. Clash Detection and Resolution Drawing
    • 7. Spatial Coordination MEP Drawing
    • 8. Pool MEP Drawing
    • 9. As Built MEP Coordinated Drawing
    • 10. Detailed MEP Coordination and Scheduling
    • 11. Supporting Coordination Drawing

 

AS-BUILT DRAWING

  • An as-built drawing is defined as a drawing created and submitted after completing the project. The set of drawings required in the later stages of construction for troubleshooting and used for future reference. These drawings the final set of drawings prepared after variation and changes executed on site with all aspect of construction and technical changes done at site. Our drawing contains all the details with accuracy dimensioning and transparency same as with the matching site on actual basis. These sets of drawings required for record keeping, future renovation, expansion and legal compliance and improved handover of the project. We provide the following services to cater the need of as-built drawings to the customer for their future use We follow best practice for as built drawings. We do as per the sequence below.
  • Complete Data Collection at site with drawings of stages of work done changes made at site during construction processes.
  • Incorporate the new tools and technology to deliver the best and accurate results.
  • Digital Scanning Process with 3D cameras and the twin technological methods.
  • High resolution images were captured during the progress of the project and at the completion of the project.
  • Using Crystal Clear detailing and annotations in order to produce high accuracy in the drawings.
  • Using standardised format as per the internation standards of drawings
  • Using the clear and concise language for ease of use to operator level and whomsoever is able to read the drawings. The visibility of fonts Labels headers and identifiers for key areas are highlighted and used bullets to break things for clear visible effects of each and every section and use of 3D scanning and LiDAR Scanning methods to enhance the accessibility of the drawings.
  • We provide the following sets of drawings: –
    • Reflected Ceiling Plan as-built Drawing
    • MEP Coordinated as-built Drawing
    • Air Conditioning System as-built Drawing
    • Ventilation System as-built Drawing
    • Control Electrical Power Equipment System Layout as-built Drawing
    • Chilled Water System Schematic as-built Drawing
    • Exhaust Schematic as-built Drawing
    • Control Wiring Schematic as-built Drawing
    • Lighting Layout Plan as-built Drawing
    • Power Layout Plan as-built Drawing
    • Detailed cable tray and looping as-built Layout drawing
    • Detailed Equipment GAD and Foundation as-built drawing
    • General arrangement drawing for all equipment as per actuals
    • HV MV and LV Layout as built Drawings.
    • Building Security/ Surveillance (CCTV) System as-built Drawing.
    • PA System, Networking Layout as built Drawing.
    • BMS System detailed as-built layout Drawing.
    • Plumbing Layout (Drainage and water Supply) as-built drawing.
    • Water Supply Schematic Layout as-built drawing.
    • As-built updated external development site plan layout.
    • WTP, STP and Pump GAD and Detailed as-built drawing.
    • Wet & Dry Riser FFTG System as-built drawing
    • Pumproom Detailed as-built drawing
    • As-built Fire sprinkler and Hydrant System layout drawing
    • Fire Alarming Zoning and detailing devices layout as-built drawing
    • Evacuation Plan in case of Emergency as-built drawing.
    • Schematic as-built layout drawing for riser mains and floor routing.

TECHNICAL & CONSTRUCTIONAL DOCUMENTATION

  • Technical Documentation is the term used to describe the class of information that contained in a document in order to create and describe the use, functionality or building architecture and services products and systems. These documents are backbone of construction and process industries which contains the information required for the services system of building. ISO and country standards are used to define the quality of documents prepared for the ease of project execution, hurdle to be clear in advance before execution. Ease for Clients Contractors Project In-charge and PMC to deliver the project in time considering the constraints of project. The following are the key elements of technical documents that we offer.
  • Service Documentation- It contains the complete details of all the Building Engineering Service that we offer. The training manual of each item to be executed, precaution and handling process of products and services.
  • Process Documentation- It contains the complete information of the products, equipment and items involved in the execution of service. Like Procurement precautions GAD, Unloading Handling Storing and installation. Scheduling, reports matrices to track and project staff and resource performance.
  • Integrated Documentation- The integrated documentation contains the information of the activities involved and linked with other services and processes
  • Pre and Post project Documentation- This document contains the information taken care during preprocess of any service and building architecture, RFP’s and Proposals, tender documentation and detailing. The post documents contain Product Manual Operational and Maintenance Manual, Service Manuals, Dos and Do not Dos Testing Processes, User Guide Data Sheets, check sheets references
  • Key Documentation: This document contains the key information of precise equipment software keys Lock Passwords and secure documentation to be used only the core person from project and operation managers.
  • Documentation Formats: We offer the documents in the form of PDFs EXCEL, WORD, PPTS, DWGS and other basis standard formats ready to use.

PROOF CONSULTANCY

  • We, at ECEPL, are experts at peer review and proof checking of designs and drawings by other consultants. As an expert in our field, we ensure that any errors in design are identified and rectified at the design stage itself. This eliminates the risk of unnecessary expenses & delays and ensures that there is no major setback once the construction of the project begins.
  • We Offer following under proof consultancy: –
  • Comprehensive proof checking services for all kinds of Building Service.
  • Review of basic geometry conceptual arrangement and workability of a Services and its components.
  • Detailed review of Services design and drawings and give suggestions to rectify.
  • Review of Building services designs to check their compliance with country-specific design standards.
  • Feasibility of erection and execution of the proposed scheme.
  • Suggestions for improvements, alternate designs either to increase the margin of safety or to optimise the proposed design.
  • With our extensive exposure to the building services, we offer guaranteed solutions at the preliminary stages of executions to avoid costly modification and retrofits after the completion of project.
  • We are committed to deliver the quality of proof services to deliver the best project service experience to get the successful Project.

 

 

WATER BODIES N FOUNTAINS

  • Water a word name suggest itself as the mother of living beings. Every living being contains enormous amount of water in the body and same is the case of building and its requirement. So we are here to help and suggest the presence of water in different formats as water bodies or in the form of decorous fountains which escalates the architectural look of the building and also the presence of life element in the décor and make the environment humid. We offer the following.
  • Outdoor Fountain
  • Indoor Fountain
  • Waterfall Fountain
  • Solar Fountain
  • Bird Fountain
  • Free Flow Fountain
  • Spouting Fountain
  • Tiered Fountain
  • Wall Fountain
  • Cascading Fountain
  • Invisible or Disappearing Fountain
  • Floating Fountain
  • Idolatry Fountain
  • Swimming Pool Fountain
  • Decorative Fountain
  • Digital Fountain
  • LED Fountain
  • Tabletop Fountain
  • Indoor Wall Fountain
  • Glazing Fountain
  • Wooden Fountain
  • Musical
  • Indoor Pool Design
  • Aquarium
  • Indoor Pond
  • Outdoor Pond
  • Swimming pool
  • Jacuzzi’s
  • Water baths

 

 

SITE COORDINATION

  • Site Coordination is the most critical activity for the deliverance of best of a project. A perfect Coordination results in smooth and handy operations of the services and trouble free Maintenance.
  • We offer the following services: –
  • Coordinating work activities with other team members to ensure that projects are completed on time and within budget
  • Providing training to crew members on safety precautions, company policies, and job skills
  • Scheduling staff time efficiently to ensure that all project goals are met within specified time frames
  • Monitoring the progress of construction projects to ensure that contractors are meeting deadlines and adhering to specifications
  • Estimating costs for labour and materials needed for projects
  • Coordinating with other team members to ensure that all aspects of a project are completed on time.
  • Coordinating with architects, engineers, contractors, and customers to monitor the progress of construction projects
  • Recording construction details such as measurements, materials used, and building codes used
  • Managing safety procedures on construction sites to ensure worker safety
  • Our Key Concerns for site coordination are:-
    • Keep safety a top priority — Commitment from leadership
    • Understand site constraints — and opportunities.
    • Foster a healthy jobsite culture.
    • Map out the sequence of tasks.
    • Strategically select subcontractor partners.
    • Document everything.
    • Incorporate rigorous quality management procedures.
    • Prioritize open and clear communication
    • Embrace technology.
    • Incorporate lessons learned from past projects.
    • Create a project closeout checklist.

PROJECT MANAGAMENT CONSULTANCY

  • A project management consultant plays the role of a planner, advisor, and a project management team leader to conceptualize and implement solutions that relate to quality or process improvements.
  • We the Project management consultants are valuable assets to any organization as they enable the stakeholders of a project to identify and rectify inefficiencies in processes and workflows.
  • The organization might want to resolve a specific question, there could be a leadership void, operations or performance are lacking and so on. The PMC’s will be hired and work closely with their clients to identify and resolve project management-related issues. We offer the following Services to your project and provide value addition in the timely deliverance of the project.
  • We Provide the Skilled Engineers, Managers and Service team for the quality and timely deliverance of project.
  • We Provided Experienced team with high profile deliverance and 5-10 Years of experience as a project manager.
  • We have Expertise team of all core services to deliver the best in the industry with viable solution and vital resource.
  • We provide the Training to all the incoming employees and let them know the deliverance and knowledge sessions are there to make the site collisions resolved. Monitor each and every minute activities and the assignments are fully completed on timely basis.
  • We Resolve shoot at site problems, frame issues and the concern person from our team look into it. We facilitate Creativity and helping out to work with solution. We provide options to the solve the problems. We Use tools and techniques to deliver the best of services.
  • We are Accountable to each and every single activity reviews on meetings, and decision making and make sure the solution is incorporated with no hurdles
  • We Upgrade our Resources time to time as per the project requisite and we consider the project as a our prime focus and Adding Value to the project is our target.
  • We also minimize the risk and cost related to project while delivering the quality of services

             

HVAC & R

  • Review the Site location.
  • Calculation of Heating and Cooling load.
  • Designing of Air conditioning system.
  • Designing of Ventilation system for F&B’s toilets, basement and other areas.
  • Preparation of design basis report (DBR).
  • Submission of report and get clients review on the system considered and planned.
  • Considering clients view and finalizing equipment.
  • Finalization of design basis report in accordance with the discussions and suggestions.
  • Sizing & placement of equipment as per architect aspect and site need.
  • Finalizing drawings in accordance with Reflected Ceiling Plan in coordination with architect and interiors.
  • Scheduling of Equipment (Low & High Side).
  • Sizing of Other Related Items for Preparation of SOQ.
  • Preparation of Tender Drawings for Circulation to Vender.
  • Collecting Quote and Preparation of Summary for Techno-Commercial Discussion.
  • Discussion With Client After Finalizing the Techno-Commercial Comparative.
  • Finalizing Vender with Client to Start the Work.
  • Check-in All the Site Clearance Floor wise for Allotment and Assigning the Work.
  • Routine Site Visit to Check the Quality of Work and Installation Done.
  • Finishing The Site and Handing Over System for Final Operation.

             

PLUMBING

  • Evaluating the water requirement domestic & soft water.
  • Designing the plumbing system for building.
  • Estimating the system requirement.
  • Preparation of Design Basis Report (DBR).
  • Preparation of layout for water supply, drainage internal & external.
  • Preparation of hot water system and layout.
  • Designing layout for storm water network.
  • Designing of rainwater provision for water harvesting and usage.
  • Finalizing plumbing equipment items & fixtures.
  • Estimating The Cost of Plumbing System.
  • Submittal of The Preliminary Drawings, Estimates for approval
  • Finalizing The Detailed System and Preparation of detail and Execution Layout.
  • Submitting The Final Tender Document to the Client for further Process of Execution Activities.
  • Issuing The Tender Document to the Venders and Suppliers for Capital Equipment.
  • Negotiating The Venders for Final Work Allotment.
  • Finalizing The Contractor and Supplier.
  • Monitoring of System and Routine Check Up for Integrity and Workmanship.
             

ELECTRICAL

  • Understanding the site and considering power requirement.
  • Calculation of Electrical Load and preparation of Load Summary.
  • Designing of complete Electrical System including High Voltage, Medium Voltage & Low Voltage.
  • Designing of Lighting system.
  • Preparation of Design Basis Report.
  • Submission of report and get clients’ review.
  • Final considering clients view and finalizing equipment (Transformer & DG. UPS)
  • Finalization of design basis report in accordance with the discussions and suggestions.
  • Sizing & placement of equipment as per architect aspect and site need.
  • Finalizing drawings in accordance with Reflected Ceiling Plan (RCP) drawing in coordination with architect and interiors.
  • Scheduling of equipment (electrical panel, HT panel, main LT panel floor panels, distribution boards & switch boards).
  • Sizing of other related items for preparation of SOQ.
  • Preparation of tender drawings for circulation to vender.
  • Collecting quote and preparation of summary for techno commercial discussion.
  • Discussion with client after finalizing the techno commercial comparative.
  • Finalizing vender with client to start the work.
  • Check-in all the site clearance floor wise for allotment and assigning the work.
  • Routine Site visit to check the quality of work and installation done.
  • Finishing the site and handing over system for final operation.

 

             

FIRE FIGHTING SYSTEM

  • Understanding firefighting A man using a carbon dioxide fire extinguisher to fight a fire.
    system design is crucial for ensuring the safety and protection of a building and its occupants.
  • Identifying key safety considerations such as the type of building, its occupancy, and potential fire hazards is essential for designing an effective firefighting system.
  • Selecting the right fire suppression technology, such as water-based systems, gas-based systems, or foam-based systems, depends on the specific needs and requirements of the building.
  • Integrating firefighting systems with building design involves considering factors such as building layout, accessibility, and potential obstacles for firefighters.
  • Implementing regular maintenance and inspections of firefighting systems is necessary to ensure their proper functioning in case of a fire emergency.
  • Training personnel for effective firefighting is crucial for ensuring a quick and efficient response to a fire emergency.
  • Adhering to regulatory standards and codes, such as NFPA codes and local building codes, is essential for ensuring the compliance and effectiveness of firefighting systems.
  • Submittal of the preliminary drawings and estimates for the final approval from client.
  • Finalizing the detailed system and preparation of detail and execution layout.
  • Submitting the final tender document to the client for further process of execution activities.
  • Issuing the tender document to the venders and suppliers for capital equipment.
  • Negotiating the venders for final work allotment.
  • Finalizing the contractor and supplier.
  • Monitoring of system and routine check-up for integrity and workmanship.
  • Checking and handing over of the system for final operation.
  • Application Drawing for Fire NOC.

 

 

             

FIRE PROTECTION & ALARMING SYSTEM

  • Building Layout and Occupancy Classification.
  • Identify Potential Fire Hazards.
  • Determine Necessary Zones.
  • Choose Appropriate Detectors.
  • Develop Alarm Signals and Notification Methods.
  • Determine Power Supply.
  • Create an Evacuation Plan.
  • Choose a Monitoring Service.
  • Follow Code and Regulatory Requirements.
  • Preparation of Fire Alarming Layout defining different Zone. Allocating all type of detectors required as per NBC and NFPA Latest Norms.
  • Preparation of Looping Layout for Addressable and Convention Devices.
  • Submittal of the preliminary drawings and estimates for the final approval from client.
  • Finalizing the detailed system and preparation of detail and execution layout.
  • Submitting the final tender document to the client for further process of execution activities.
  • Issuing the tender document to the venders and suppliers for capital equipments.
  • Negotiating the venders for final work allotment.
  • Finalizing the contractor and supplier.
  • Monitoring of system and routine check-up for integrity and workmanship.
  • Checking and handing over of the system for final operation.

 

             

MEDICAL GAS PIPING SYSTEM (MGPS)

  • The design will include storage requirements, type of system proposed as system locations for the following Medical Gas Services:
    • Oxygen
    • Medical Air (MA4)
    • Surgical Air (SA7-Surgical Tool Air 7Bar)
    • Vacuum/Suction Air Nitrous Oxide (N2O)
    • Helium/Oxygen (Heliox)
    • Nitrogen (N2)
    • Carbon Dioxide (CO2)
    • Nitrous Oxide/Oxygen (Gas Mixture Entonox)
    • Gas Scavenging Systems (AGSS)
    • These design guidelines are to be used in new healthcare facilities as well as facilities that will be refurbished under the process as mentioned in Part A of these Guidelines.
    • The guidelines for pipe sizing and other associated works can be based on ISO 7396.
    • NFPA 99 guidelines should be applied for zoning, materials, hazard determination, alarms.

             

INTEGRATED BUILDING MANAGEMENT SYSTEM (IBMS)

  • Designing of Integrated Building Management System as per the requirement of the services to control, monitor, data analysis, Energy Efficiency Ease of Operation and maintenance and to get the collective data of overall system to understand and control the power and consumption of units and water management and efficient utilization of resources.
  • Preparation of Design Basis Report for IBMS.
  • Submittal to client for the requirement of the system to be updated.
  • Final Updation in DBR and design to cater the clients need.
  • Preparation of Drawings and Input Output IO Summary.
  • Prepare the energy management Modules Adapters Gateways.
  • Preparation of Smart Light Management Modules.
  • Preparation of Smart Water Management Modules.
  • Preparation of the list of latest sensors, devices and hardware available in the market to incorporate in the SOQ with all the technical description.
  • Preparation of Tender Documentation and submit to client and Venders.
  • Preparation of Techno-Commercial Comparison of received offers.
  • Final discussion with venders with client and finalizing Vender and allocation of work.
  • Receiving the shop drawings Schematics and related document for final approval for GAD and Goods For Construction Drawings.
  • Giving Approval for the execution.
  • Routine Monitoring of the work assigned and quality assurance.
  • Finalizing the project for operations after submitting the handover documents and producing the operation manuals for devices equipment and the software integration for the ease of use and maintenance in future.

             

INTERNET OF THINGS (IoT)

  • The Internet of Things IoT is now a everyday needs and connected in day-to-day activities. We provide IOT Solutions incorporating with Smart System Smart Devices and in all smart service and smart Buildings. To make system effective and efficient we do align with the best communication APIs with better communication Models Functional Blocks to establish a Functional System.
  • Smart Devices
  • IoT Applications
  • Graphical User Interface
  • Smart Security and Surveillance
  • Smart Homes
  • Smart Buildings
  • Smart Cities
  • Smart Industries
  • Smart Manufacturing
  • Smart Logistics
  • Scaled Solutions
  • Cloud Based Services
  • Designing of IOT System as per the requirement of the services to smartly cater the control, monitor, data analysis, Energy Efficiency Ease of Operation and maintenance and to get the collective data of overall system to understand and control the power and consumption of units and water management and efficient utilization of resources.
  • Preparation of Design Basis Report for IOT and Smart System Processes.
  • Submittal to client for the requirement of the system to be updated.
  • Final Updating in DBR and design to cater the clients need.
  • Preparation of Drawings and Defined the devices and Detail working Principles
  • Prepare the energy management API Modules
  • Preparation of Smart Light Management Modules
  • Preparation of Smart Water Management Modules
  • Preparation of the list of latest sensors, devices and hardware available in the market to incorporate in the SOQ with all the technical description.
  • Preparation of Tender Documentation and submit to client and Venders.
  • Preparation of Techno-Commercial Comparison of received offers

             

SHOP DRAWING

  • Shop drawings are detailed drawings or plans that provide specific information about how various components of a building or structure will be fabricated, installed, or assembled. These drawings serve as a crucial communication tool between design professionals, contractors, and fabricators, ensuring that construction elements are produced and installed accurately according to the design intent and project requirements. We Provide the Following Services for Shop Drawings.
  • We have years of experience in providing MEP CAD Drafting Services and also MEP CAD detailing services to the contractors, consultants, and general contractors who are working in the sector of building service and which includes Electrical, Mechanical, Fire, Public health, and Plumbing services.
  • MEP drafting services
  • We adhere to all standards and international codes with digitization.
  • We possess advanced features that are required as per our clients’ requirements.
  • We use simple mechanism processes in designing and drawings.
  • We have more than a decade-plus plus experience in delivering MEP CAD drafting services.
  • We make sure that MEP CAD drawings are at an affordable rate.
  • CAD Outsourcing is a reliable service provider that stands on the expectations of its clients.
  • We provide high-quality work and 100% customer support for MEP design and drafting services.
  • HVAC DRAWINGS
    • 1. HVAC Layout Drawing
    • (a) Equipment position, quantity and capacity
    • (b) Air Distribution Layout
    • (c) Hot / Chilled Water Piping Layout
    • (d) Control Circuit Wiring Layout
    • (e) Fire and Smoke Extraction Layouts
    • (f) Ventilation Layout for Parking and Toilets
    • (g) Thermostat Layout
  • 2. HVAC Schematic Drawing
    • (a) Ducting & Piping Schematic Drawing
    • (b) Pressurization System Schematic Drawing
    • (c) Installation Details of HVAC Equipment and System Accessories
    • (d) Single Line Diagram of HVAC System and Electrical Panels
    • (e) Smoke Exhaust System Schematic Drawing
  • 3.HVAC Section Drawing
    • (a) Duct Section Drawing
    • (b) Piping Section Drawing
    • (c) Elevation Drawing
  • 4. Foundation Detail Drawings for all Capital Equipment
  • 5. Sectional Details for Floor Level Ducting and Piping
  • 6. Chimney Exhaust Piping
  • ELECTRICAL DRAWING LIST
    • 1.Electrical Layout Drawings
    • (a) Space Planning Layout for X’mer. DG, Panels, UPS and others
    • (b) Cable Tray Layout
    • (c) Conduiting Layout
    • (d) Point Wiring Layout (Power & lighting)
    • (e) Cable Layout
    • (f) Lighting Layout (Internal & External)
    • (g) Low Voltage Layout
    • (h) Earthing Layout
  • 2. Electrical Schematic Layout
    • (a) SLD for Panels
    • (b) SLD for Cable Laying
    • (c) CCTV Schematic Layout
    • (d) Telephone Schematic Layout
    • (e) PA System Schematic Layout
    • (f) BMS Schematic Layout
  • 3. Equipment Layouts Foundation & GAD
  • 4. External Development Layout
  • 5. Earthing Pits Detailed Layout
  • 6. Earthing and Lightning Protection Layout
  • 7. Emergency Lighting Layout
  • PLUMBING LAYOUT
    • 1.Plumbing Layout Drawings
    • (a) Space Planning Layout for Underground Tank, OHWT, Sump Location WTP, STP,
    • (b) Fixture and Appliances Location Layout Drawings
    • (c) Water Supply Layout (Hot & Cold Water)
    • (d) Drainage Layout
    • (e) Toilet layout (Water Supply & Drainage)
    • (f) Drain Channel and Storm Water Network Layout
    • (g) Level Network Layout.
  • 2. Plumbing Schematic Layout.
    • (a) Hot & Cold-Water Supply Schematic Drawing
    • (b) Drainage Schematic Drawing.
    • (c) Main Network Schematic Layout (Ring man)
  • 3. Plumbing Equipment Details Foundation Layouts & GAD
  • 4. External Development Layout with invert Level
  • 5. Water Treatment Plant Sewage Treatment Plant Detailing
  • 6. Harvesting Pit Detailed Layout
  • 7. Under Ground and Overhead Tank Details
  • 8. Typical Details of all accessories mounting and Erection Arrangement Layout
  • 9. Grease Traps, Sump Details, Anti Siphonage, Catch Basin Khurra and other Layouts
  • FIRE FIGHTING SYSTEM DRAWINGS
    • 1. Dry Riser System Layout
    • 2. Fire Fighting Space Planning Layout
    • 3. Fire Sprinkler System Layout
    • 4. Fire Water Curtain System Layout
    • 5. Fire Hydrant System Layout
    • 6. Fire Extinguisher System Layout
    • 7. Fire Evacuation Layout
    • 8. Foam System and FM200, CO2 System Layout
    • 9. Schematic Drawings
      • (a) Sprinkler Riser Main Layout
      • (a) Hydrant Riser Schematic Layout
      • (a) Yard Hydrant Schematic Layout
      • (a) Fire Line Drain Schematic Layout
      • (a) Zone Control Station Valve Schematic Layout
    • 10. Fire Pump Room Layout
    • 11. Equipment Foundation Layout
    • 12. Fire Pump Electrical Connection Layout.
    • 13. Control Wiring Layout of Equipment
  • FIRE ALARMING SYSTEM DRAWINGS
    • 1. Fire Protection System Planning
    • 2. Zoning Layout
    • 3. Smoke Detection (Heat & Smoke) Layout
    • 4. Addressable and Conventional System Layout
    • 5. Field Devices System Layout
    • 6. Point-to-Point Wiring Diagrams
    • 7. Individual Device Interconnection Drawings
    • 8. Control Wiring Layout Plan
    • 9. Annunciator and Monitoring Layout
    • 10. Schematic Drawings
      • (a) Smoke & Heat Detection Schematic Layout
      • (b) Control Circuit Schematic Layout
      • (c) Fire Alarm Riser Schematic Layout
  • MEP COORDINATION DRAWINGS
    • 1. Penetration Drawing
    • 2. RCP Coordinated Service Plan Drawing
    • 3. Coordination Floor Layout Drawing
    • 4. Equipment Coordination Drawing
    • 5. Black Out and Sleeves Coordinated Drawing
    • 6. Clash Detection and Resolution Drawing
    • 7. Spatial Coordination MEP Drawing
    • 8. Pool MEP Drawing
    • 9. As Built MEP Coordinated Drawing
    • 10. Detailed MEP Coordination and Scheduling
    • 11. Supporting Coordination Drawing

 

             

AS-BUILT DRAWING

  • An as-built drawing is defined as a drawing created and submitted after completing the project. The set of drawings required in the later stages of construction for troubleshooting and used for future reference. These drawings the final set of drawings prepared after variation and changes executed on site with all aspect of construction and technical changes done at site. Our drawing contains all the details with accuracy dimensioning and transparency same as with the matching site on actual basis. These sets of drawings required for record keeping, future renovation, expansion and legal compliance and improved handover of the project. We provide the following services to cater the need of as-built drawings to the customer for their future use We follow best practice for as built drawings. We do as per the sequence below.
  • Complete Data Collection at site with drawings of stages of work done changes made at site during construction processes.
  • Incorporate the new tools and technology to deliver the best and accurate results.
  • Digital Scanning Process with 3D cameras and the twin technological methods.
  • High resolution images were captured during the progress of the project and at the completion of the project.
  • Using Crystal Clear detailing and annotations in order to produce high accuracy in the drawings.
  • Using standardised format as per the internation standards of drawings
  • Using the clear and concise language for ease of use to operator level and whomsoever is able to read the drawings. The visibility of fonts Labels headers and identifiers for key areas are highlighted and used bullets to break things for clear visible effects of each and every section and use of 3D scanning and LiDAR Scanning methods to enhance the accessibility of the drawings.
  • We provide the following sets of drawings: –
    • Reflected Ceiling Plan as-built Drawing
    • MEP Coordinated as-built Drawing
    • Air Conditioning System as-built Drawing
    • Ventilation System as-built Drawing
    • Control Electrical Power Equipment System Layout as-built Drawing
    • Chilled Water System Schematic as-built Drawing
    • Exhaust Schematic as-built Drawing
    • Control Wiring Schematic as-built Drawing
    • Lighting Layout Plan as-built Drawing
    • Power Layout Plan as-built Drawing
    • Detailed cable tray and looping as-built Layout drawing
    • Detailed Equipment GAD and Foundation as-built drawing
    • General arrangement drawing for all equipment as per actuals
    • HV MV and LV Layout as built Drawings.
    • Building Security/ Surveillance (CCTV) System as-built Drawing.
    • PA System, Networking Layout as built Drawing.
    • BMS System detailed as-built layout Drawing.
    • Plumbing Layout (Drainage and water Supply) as-built drawing.
    • Water Supply Schematic Layout as-built drawing.
    • As-built updated external development site plan layout.
    • WTP, STP and Pump GAD and Detailed as-built drawing.
    • Wet & Dry Riser FFTG System as-built drawing
    • Pumproom Detailed as-built drawing
    • As-built Fire sprinkler and Hydrant System layout drawing
    • Fire Alarming Zoning and detailing devices layout as-built drawing
    • Evacuation Plan in case of Emergency as-built drawing.
    • Schematic as-built layout drawing for riser mains and floor routing.

             

TECHNICAL & CONSTRUCTIONAL DOCUMENTATION

  • Technical Documentation is the term used to describe the class of information that contained in a document in order to create and describe the use, functionality or building architecture and services products and systems. These documents are backbone of construction and process industries which contains the information required for the services system of building. ISO and country standards are used to define the quality of documents prepared for the ease of project execution, hurdle to be clear in advance before execution. Ease for Clients Contractors Project In-charge and PMC to deliver the project in time considering the constraints of project. The following are the key elements of technical documents that we offer.
  • Service Documentation- It contains the complete details of all the Building Engineering Service that we offer. The training manual of each item to be executed, precaution and handling process of products and services.
  • Process Documentation- It contains the complete information of the products, equipment and items involved in the execution of service. Like Procurement precautions GAD, Unloading Handling Storing and installation. Scheduling, reports matrices to track and project staff and resource performance.
  • Integrated Documentation- The integrated documentation contains the information of the activities involved and linked with other services and processes
  • Pre and Post project Documentation- This document contains the information taken care during preprocess of any service and building architecture, RFP’s and Proposals, tender documentation and detailing. The post documents contain Product Manual Operational and Maintenance Manual, Service Manuals, Dos and Do not Dos Testing Processes, User Guide Data Sheets, check sheets references
  • Key Documentation: This document contains the key information of precise equipment software keys Lock Passwords and secure documentation to be used only the core person from project and operation managers.
  • Documentation Formats: We offer the documents in the form of PDFs EXCEL, WORD, PPTS, DWGS and other basis standard formats ready to use.
             

PROOF CONSULTANCY

  • We, at ECEPL, are experts at peer review and proof checking of designs and drawings by other consultants. As an expert in our field, we ensure that any errors in design are identified and rectified at the design stage itself. This eliminates the risk of unnecessary expenses & delays and ensures that there is no major setback once the construction of the project begins.
  • We Offer following under proof consultancy: –
  • Comprehensive proof checking services for all kinds of Building Service.
  • Review of basic geometry conceptual arrangement and workability of a Services and its components.
  • Detailed review of Services design and drawings and give suggestions to rectify.
  • Review of Building services designs to check their compliance with country-specific design standards.
  • Feasibility of erection and execution of the proposed scheme.
  • Suggestions for improvements, alternate designs either to increase the margin of safety or to optimise the proposed design.
  • With our extensive exposure to the building services, we offer guaranteed solutions at the preliminary stages of executions to avoid costly modification and retrofits after the completion of project.
  • We are committed to deliver the quality of proof services to deliver the best project service experience to get the successful Project.

 

 

             

WATER BODIES N FOUNTAINS

  • Water a word name suggest itself as the mother of living beings. Every living being contains enormous amount of water in the body and same is the case of building and its requirement. So we are here to help and suggest the presence of water in different formats as water bodies or in the form of decorous fountains which escalates the architectural look of the building and also the presence of life element in the décor and make the environment humid. We offer the following.
  • Outdoor Fountain
  • Indoor Fountain
  • Waterfall Fountain
  • Solar Fountain
  • Bird Fountain
  • Free Flow Fountain
  • Spouting Fountain
  • Tiered Fountain
  • Wall Fountain
  • Cascading Fountain
  • Invisible or Disappearing Fountain
  • Floating Fountain
  • Idolatry Fountain
  • Swimming Pool Fountain
  • Decorative Fountain
  • Digital Fountain
  • LED Fountain
  • Tabletop Fountain
  • Indoor Wall Fountain
  • Glazing Fountain
  • Wooden Fountain
  • Musical
  • Indoor Pool Design
  • Aquarium
  • Indoor Pond
  • Outdoor Pond
  • Swimming pool
  • Jacuzzi’s
  • Water baths

 

 

             

SITE COORDINATION

  • Site Coordination is the most critical activity for the deliverance of best of a project. A perfect Coordination results in smooth and handy operations of the services and trouble free Maintenance.
  • We offer the following services: –
  • Coordinating work activities with other team members to ensure that projects are completed on time and within budget
  • Providing training to crew members on safety precautions, company policies, and job skills
  • Scheduling staff time efficiently to ensure that all project goals are met within specified time frames
  • Monitoring the progress of construction projects to ensure that contractors are meeting deadlines and adhering to specifications
  • Estimating costs for labour and materials needed for projects
  • Coordinating with other team members to ensure that all aspects of a project are completed on time.
  • Coordinating with architects, engineers, contractors, and customers to monitor the progress of construction projects
  • Recording construction details such as measurements, materials used, and building codes used
  • Managing safety procedures on construction sites to ensure worker safety
  • Our Key Concerns for site coordination are:-
    • Keep safety a top priority — Commitment from leadership
    • Understand site constraints — and opportunities.
    • Foster a healthy jobsite culture.
    • Map out the sequence of tasks.
    • Strategically select subcontractor partners.
    • Document everything.
    • Incorporate rigorous quality management procedures.
    • Prioritize open and clear communication
    • Embrace technology.
    • Incorporate lessons learned from past projects.
    • Create a project closeout checklist.

             

PROJECT MANAGAMENT CONSULTANCY

  • A project management consultant plays the role of a planner, advisor, and a project management team leader to conceptualize and implement solutions that relate to quality or process improvements.
  • We the Project management consultants are valuable assets to any organization as they enable the stakeholders of a project to identify and rectify inefficiencies in processes and workflows.
  • The organization might want to resolve a specific question, there could be a leadership void, operations or performance are lacking and so on. The PMC’s will be hired and work closely with their clients to identify and resolve project management-related issues. We offer the following Services to your project and provide value addition in the timely deliverance of the project.
  • We Provide the Skilled Engineers, Managers and Service team for the quality and timely deliverance of project.
  • We Provided Experienced team with high profile deliverance and 5-10 Years of experience as a project manager.
  • We have Expertise team of all core services to deliver the best in the industry with viable solution and vital resource.
  • We provide the Training to all the incoming employees and let them know the deliverance and knowledge sessions are there to make the site collisions resolved. Monitor each and every minute activities and the assignments are fully completed on timely basis.
  • We Resolve shoot at site problems, frame issues and the concern person from our team look into it. We facilitate Creativity and helping out to work with solution. We provide options to the solve the problems. We Use tools and techniques to deliver the best of services.
  • We are Accountable to each and every single activity reviews on meetings, and decision making and make sure the solution is incorporated with no hurdles
  • We Upgrade our Resources time to time as per the project requisite and we consider the project as a our prime focus and Adding Value to the project is our target.
  • We also minimize the risk and cost related to project while delivering the quality of services

Get a free quote

24 hours, That's all it will take you to figure out the cost benifits of outsourcing